We are open and prepared to serve you. | View Our COVID-19 Safety Procedures

HVAC Zone Control Systems in Dallas, TX

AirCo Services the Fort Worth, Arlington & Flower Mound Areas

If your home is like many others, then you’re probably only able to set one temperature throughout your house. Even if you’re only using your bedroom or your living room and kitchen, you still have to cool or heat your entire home just to stay comfortable in those rooms. However, with zone control, homeowners can set the temperature in different areas of their home independently of each other.

hvac zone

This is a huge advantage for homeowners and it could help to reduce the amount of energy that you use in your home. AirCo is proud to offer total zone control service for all makes and models of systems. If you need a new zone control system installed, or if you need repairs for your current zone heating and cooling system, just give us a call anytime.

Call AirCo today at 817-591-1225 or contact us online to talk with one of our specialists about HVAC zone control systems.

Why Use Zoned Heating & Air Conditioning?

Zone heating and zone air conditioning systems are designed to allow homeowners to retrofit their existing HVAC system so that they can heat or cool certain sections of their home independently of the rest. If you have a typical forced-air heating and cooling system like central AC, a furnace, or a heat pump, then you’re likely only able to set one temperature for your entire home. However, with zone heating and zone air conditioning installation from AirCo, you’ll be able to more specifically target your heating and air conditioning efforts to just the areas of your home that you’re using.

Zoned HVAC Installation in the Metroplex

AirCo provides complete zone heating and zone air conditioning installation for all types and brands of systems. Your current heating and air conditioning system likely uses a long series of ducts in your attic or crawl space or under your floors. Zone control systems can be retrofitted into your current ductwork using a series of dampers that guide the heated or cooled air to the zones that you want to heat or cool. The dampers are then wired to a central control panel that you can control.

In order to install your zone control system, our technicians will talk with you about which areas of your home you want to designate as the zones. From there, we’ll inspect your duct system to figure out exactly where we need to install the dampers. Our heating and air conditioning technicians will cut holes into your ductwork, install the dampers, and then thoroughly seal up the holes that they cut. We will then wire your dampers to a thermostat or control panel so that you can start enjoying the comforts of your new zone heating and zone air conditioning system.

Benefits of Zone Heating & Cooling

So what do you actually get with a zone heating and cooling system? Well, the first and most obvious benefit is that you could be able to reduce the amount of energy that you use to heat and cool your home. Conditioning the air in just one section of your home will cost a lot less than having to constantly heat or cool your entire home.

Another benefit is that you might be able to reduce repair needs for your AC or heater because they’ll likely be used less. A zone system could also potentially extend your equipment’s life by reducing the amount of time that it operates.

Call AirCo for HVAC Zone Control Systems

AirCo is a full-service heating and air conditioning contractor that only offers the best possible service to each of our customers. We are a family-owned business, and we’ve been around for over 30 years, which means that we have the experience and knowledge to provide our customers with top quality workmanship.

To prove our dedication to our customers’ satisfaction, we offer a 100% comfort guarantee and we’re available 24/7 for emergency heating and air conditioning service. Our A+ rating from the Better Business Bureau and 4 straight years of Angie’s List Super Service Awards are proof that we provide outstanding service to all of our customers.

The zone control experts at AirCo offer quality repair, installation, and maintenance services throughout the Fort Worth Metroplex. Call our team at 817-591-1225 today or contact us online for expert HVAC zone control systems.

Request Service
today!

Contact Form - Subpage Sidebar

Your Neighbors Trust Our Expertise

5,600+
Total Reviews
4.8
Google Rating

“Fabulous service and the BEST people! The people are stellar!”

Laura W.

Specials on Heating & Cooling Service

more coupons

Financing Options Are Available

Low monthly payments are available for repairs and installations.

Why Choose AirCo

Same Day Service / Next Day Installation

24/7 Emergency Service

Proven Experts: 42,000+ HVAC Systems Installed

Background Checked & Drug-Tested Technicians

Advance "On-Our-Way" Call So You Can Go About Your Day

Family-Owned & Operated for 30 Years

Outstanding Guarantees: No-Lemon, Zero-Risk Repair & More

Proudly Serving the
DFW Metroplex

Fort Worth, Arlington, Grand Prairie, Flower
Mound, Grapevine, Southlake, and more!